RF600DC VARIABLE SPEED MOTOR CONTROLLER
The RF-600DC Wireless DC Motor Controller provides RPM control for a single, 2 pole DC motor that can output 180 amps for up to 5 seconds and a continuous amperage of up to 80 amps. The speed or RPM control is done by providing the user 5 outputs, approximately 1/5 of the maximum motor RPM. The RF-600DC also incorporates a full RPM feature the runs the motor full speed for 6 seconds and then automatically shuts off and an E-Stop.
To protect the motor and electronics, the RF-600DC has built-in safety circuits. These include:· Automatic shut down if motor is locked up. How this is done is if the receiver senses a current draw of more than 180 amps for more than 10mS the unit will shut down from 1 to 30 seconds.· Automatic shut off if the current draw does not drop below 80 amps after 5 seconds. Once again, the receiver will shut down for 1 to 30 seconds.